ToolFusion

Calculate solids mass flow rate from corrected density and TS fraction

Calculate solids mass flow rate from corrected density and TS fraction.

Runnable This tool can run, but independent engineering verification has not been established.

Quick Answer

The calculate solids mass flow rate from corrected density and ts fraction computes solids_mass_flow_rate from the input values you provide.

Calculator

solids_mass_flow_rate (kg⁄h)
—

ToolFusion Engineering Network

ToolFusion Engineering Network

Access thousands of engineering calculators, standards, and design tools. Join the ToolFusion network for comprehensive engineering resources.

Explore ToolFusion

Result Interpretation

Calculate solids mass flow rate from corrected density and TS fraction computes solids_mass_flow_rate in kg/h using the defined engineering formula and the input values provided. solids_mass_flow_rate is expressed in kg/h. No universal acceptance threshold is defined by this calculator.

Worked Example

default_test

Given:

  • q_v = 28.5
  • w_ts = 4.2
  • rho_slurry = 1058.3

Expected Result:

  • solids_mass_flow_rate = 1266.7851

Engineering Interpretation:

Under the given input conditions, the calculated result is: solids_mass_flow_rate = 1266.7851 kg/h.

The actual numerical result is computed by the Runtime engine using the persisted tool definition. The values shown here come from deterministically validated test cases.

Formula / Method

solids_mass_flow_rate = (w_ts/100)*rho_slurry*q_v

solids_mass_flow_rate.

Variables

SymbolLabelRoleDescription
w_ts w_ts INPUT w_ts
rho_slurry rho_slurry INPUT rho_slurry
q_v q_v INPUT q_v
solids_mass_flow_rate solids_mass_flow_rate OUTPUT solids_mass_flow_rate

Calculation Steps

  1. Enter the w_ts in percent.
  2. Enter the rho_slurry in kg/m³.
  3. Enter the q_v in m³/h.
  4. Read the solids_mass_flow_rate (kg/h) from the results.

Frequently Asked Questions

What does this calculator calculate?

The Calculate solids mass flow rate from corrected density and TS fraction estimates solids_mass_flow_rate based on the input parameters you provide

Why is w_ts important in this calculation?

w_ts is directly proportional to solids_mass_flow_rate. When you enter w_ts in percent, the calculator uses it in the engineering formula to compute the output

How should I interpret the result solids_mass_flow_rate?

The calculator outputs solids_mass_flow_rate in kg/h. The result is computed directly from the input values using the defined engineering formula

What units should I use for the inputs?

Enter each value in the units shown next to the input field: w_ts (percent), rho_slurry (kg/m³), q_v (m³/h). Make sure all inputs use the specified units for consistent results

What assumptions does this calculator use?

This calculator uses automatically validated engineering formulas. Results are approximate and should be validated against site-specific conditions, applicable codes, and professional engineering judgment

Browse More Tools

Explore the full index of engineering calculators on this vertical site.